![Suresh Bopitiya](/img/default-banner.jpg)
- 133
- 605 173
Suresh Bopitiya
Australia
Приєднався 9 вер 2011
vidaXL Outdoor Party Tent
Bought the vidaXL Outdoor Party tent for an event. Was pretty happy with the product. Not the best quality. It won't withstand strong wind and might be OK in rain (not heavy rain). We were lucky with the weather, so it worked out well for us. It took 2 of us about 45 mins to put up (instructions were OK to follow), and me 30 mins to take down and pack away (didn't fit back in the box!)
Переглядів: 300
Відео
My Hens using the Rat/Mice Proof Toggle Feeder
Переглядів 1262 місяці тому
They took a bit of time getting used to it, but happy to see them all using it now. Initially they were scared to go under it. Been installed for quite some time now. It has weathered rainy days with the pellets staying dry. The best part is the Rats/Mice haven't gotten into it.
Red Flag Tail
Переглядів 842 місяці тому
A quick clip, showing my Aquarium in particular my Red Flagtail.
VISBELLA DIY Headlight Restoration Kit
Переглядів 2192 місяці тому
I bought this from FB Marketplace and found it to be a terrible product. My headlights ended up being worse using the product.
Cuisinart Multi-Temp Kettle CPK-18XA Un-boxing
Переглядів 843 місяці тому
Finally updated our kettle to match our toaster. Un-boxed and used for the first time.
Cuisinart Signature Automated Digital Toaster CPT-540XA Un-boxing
Переглядів 1673 місяці тому
Our Delonghi Toaster packed up and I replaced with a Cuisinart Signature Automated Digital Toaster CPT-540XA. This is me un-boxing and using for the first time.
Water Proof & Rat Proof Toggle Chicken Feeder
Переглядів 1 тис.3 місяці тому
I found how to make one of these on UA-cam. There are so many videos out there on how to make one. Mine has a slight variation, I bought a big funnel and trimmed it down to fit inside the container and over the toggle. This means that all the food goes down to the toggle and you don't end up with any on the sides of the container. Works really well.
VW Golf MK4 Replacing Centre Console Armrest Cover
Переглядів 1684 місяці тому
Thought I'd share how I removed and replaced the cover on the centre console arm rest console as the lug keeping it in place was broken.
My Mouse Trap
Переглядів 568 місяців тому
I thought I'd try to make a mouse trap. It looked like the others seen on UA-cam but it didn't catch anything - perhaps it was the Pink bucket...
HAILEA HAP 100 High Flow Air Pump review
Переглядів 4088 місяців тому
I just got the Hailea HAP 100 air pump and was really excited to set it up, only to find out that it was way too noisy to have inside the house.
My Silver Tin Foil Barbs eating Cucumber
Переглядів 378 місяців тому
My Silver Tin Foil Barbs eating Cucumber
Tyre Fitting at Neway Wheels
Переглядів 8911 місяців тому
I recently got my Wheels restored at Neway Wheels. They did a fantastic job, from sandblasting the wheels, to polishing out the gutter rashes (mine were pretty bad as wheels were from a wrecker), they also fixed a dent caused by a tow truck chain fitted across the spoke. Powder coating primer, baking, spraying colour and CNC diamond cut and finally lacquer. Wheels are back to new. The whole pro...
My DIY 6FT Aquarium, 4FT Sump and Steel Stand
Переглядів 354Рік тому
My DIY 6FT Aquarium, 4FT Sump and Steel Stand
Improved DIY Metal Chicken Feeder - hopefully rat proof - Unfortunately not rat proof.
Переглядів 1 тис.Рік тому
Improved DIY Metal Chicken Feeder - hopefully rat proof - Unfortunately not rat proof.
Installing my ESHOPPS Eclipse L Overflow Box
Переглядів 6 тис.Рік тому
Installing my ESHOPPS Eclipse L Overflow Box
Easy way to cut through Silicone in Fish Tank
Переглядів 2,5 тис.Рік тому
Easy way to cut through Silicone in Fish Tank
How to Tighten a Fisher & Paykel Fridge Handle
Переглядів 4,4 тис.2 роки тому
How to Tighten a Fisher & Paykel Fridge Handle
Cutting through Silicone Seal on Fish Tank with Fishing Line
Переглядів 8802 роки тому
Cutting through Silicone Seal on Fish Tank with Fishing Line
VW Golf Mk4 / Bora Handbrake Boot Removal
Переглядів 2,1 тис.2 роки тому
VW Golf Mk4 / Bora Handbrake Boot Removal
Flipper and Fluval Magnetic Aquarium Glass Cleaner
Переглядів 2502 роки тому
Flipper and Fluval Magnetic Aquarium Glass Cleaner
Cockatoo helps our Neighbours with Weeding and Gardening
Переглядів 282 роки тому
Cockatoo helps our Neighbours with Weeding and Gardening
Thanks, that stopped me from buying it. Was going to place it for the pond outside, but the noise is too high.
Glad I could help
Dobra robota!!!
Thanks
Does anyone know where the model number is on them?
Is this emgine has supported long hour of work?
I had it running for a few hours at a time and it was ok.
I am going to try this with guitar string or piano wire. I had a catastrophic leak (split seam) on my 40 year old 150 gallon aquarium and have to re-build it.
How did you go? I bought a cheese cutting wire which was really thin, but too thick to get in between the seals.
Also I forgot to ask, do you notice any difference in the gas bills from your previous tank hot water system? Ty
Hi, answering both your questions - Yes, I am in Australia (Victoria). I think I paid around $3500, the gas pipes had to be upgraded in the installation. We have been really happy with it. Family of 5 and NEVER run out of hot water like we used with the old unit. It hasn't skipped a beat. I can't really tell you about the differences in our Bills as it has been a long time and energy prices have been increasing... Lastly, if you have a long house and it's installed at the start of the line, you will use a fair amount of water before it gets hot. My friend has 3 installed in his house and doesn't have the same wait times. I didn't get mine installed with the heat limiter and it heats to 60 degrees. Thanks for watching.
Hi Are you in Australia ? What price do they usually charge for the conversion. How is it going now, I am interested as I am going to get the same model soon. Ty for your video. Is it ok after 4y
Fantastic, I tried using a hammer and punch on my deck. Nothing happening. Would you be willing to tell me the model of that nail gun. Thank you so much
Thank you. It's pretty old, so not sure if its available anymore. The model is BASSO.
Hi nice i got one my self same modle 9403 11amp and i love it. It's a tank
Thanks. I love it too. It's been going strong for quite a few years now.
Looks nice!
Thank you.
Can't believe I'm the first to comment...Would love to see links to where you got that tool and the vent...nice job on the video!
Thanks. The Vent was from Bunnings (hardware store in Australia) and the tool is a Dremel Trio. I am not sure if you can get a dremel trio anymore. I could have used a reciprocating saw instead, but I bought the dremel tool years ago and haven't really used it so I thought I'd give a go!
Great video, thank you, I have been looking for video on how to actually do this.
No problem. Thank you for your comment and I hope you managed to do it yourself.
Great tip
I’d start to follow ur 4007 update
Thank you. Unfortunately I traded in my 4007 for another car in 2019. The 4007 was a great car for us.
I got same model 2012 Peugeot 4007 diesel, did u change the transmission oil? From Sydney
No I didn't ever change the trans oil. I used to get the car serviced by Peugeot. I had to do this repair because it was Christmas eve and I needed to use the car. I sold it in 2019. It was a good car.
Turn down the pressure, you breaking the wood
Will do next time.
It doesn’t do anything
Yes, I have to agree with you. I made this really for the kids from an old printer. I didn't get a chance to look at improving the design.
Does the top skip have chains on it?
I can't remember. He was very skilled though.
No, the chains are only at the bottom skip bins, I’d be paranoid to hit any power lines
thanks mate .. had the same issue
Cannot find instructions. Sorry. Can you pls attach
Sorry, there are no instructions available on-line. That's why I made the video. I sold this buggy years ago now.
That’s happening to me to return to low
Did you fix it?
Very nuce
Thanks
Thank you sir. Found this film an did it like that now. How did it go whit your car, was it fine after?
Hi Kristian, thanks and no problem. The car was perfectly fine afterwards. I got all the petrol out and filled with new diesel. Did your car work OK?
Can we fix these shutters to existing wardrobe space?
That's what I did. I had to make some rails to hang the doors.
@@SureshBopitiya I mean we have own old space. Not the one from ikea. Like we have brick work done
@@varshajuvekar8750 measure the space you have to make sure the doors will cover the gap and height. Then the next step is the make the wooden rails that the doors hang on. The inside or the cupboard is up to you. I hope this helps.
Nice work sir, its like they knew when they made the printer 😁🙏im gonna make one, i love the idea so simple and easy. Thank you
Glad you like it
Excellent job 👍
Thanks 👍
Ive noticed the power cable is exposed, can that be a problem during rain/storms even tho its an outside system?
The powerpoint is a weatherproof rated powerpoint and the lead from the unit is not damaged in any way. It's mounted on a wall under the eaves of my house, so it's not fully protected from rain. It has had to endure heavy rain since being installed and it's still working without any issues.
Nova Prime Exactly, not at all waterproofed plug/socket. Unfortunately, my system less than 3 years old has also been installed by a dopey/lazy plumber/electrician and has just died after torrential rains. I am trying to troubleshoot and have no idea how to test if pilot light is an issue and came across this example of yet another shonky tradesman install lol.
@@tracer7898 I had this system installed to my old mans house a year ago and the power switch is already crack/weathered. I cant imagine it lasting much longer unless either I or my dad build a DIY housing over the entire thing.
@@novaprime5114 the plug is the problem and I suspect water damage, even though under eave. the fitting should be waterproof. I am flat broke and still havent recovered from $1,000s installation and now will pay another overpriced tradey $300 to do what should have been done initially grrr
He lifted it heigh for clearance and the wood isn't to hold weight it's to stop the support rollers which try to stop truck lifting the cab and the wood is to stop them digging into the ground
Disel
I'm a skip bin driver... Best job ever, been doing it for about 8 years.
In answer to Candice , it looks like a very generic nail gun . All same same ,but different 👍
Does it harm the gun at all ?? Can u set it to go deeper ?
I think you'd have to be careful what your trying to punch into. I don't know the workings of the nail gun, but it looks like a rod comes out and pushes the nail into the material. Without nails the rod will strike into the material and might bend if its too hard. Yes, I think you can adjust the depth. The point at the front looks like it can be adjusted further away from the material. I found it much easier than punching each nail down with a hammer and nail punch!
Dude legend, i was out trying to pull my seats out and thought i had to remove all the bloody plastic trims around the door 😁👍🏼
thank you soon much!!! Love the machine but was becoming angry with this malfunction. Thank you heaps. Love the machine again!!!
Cheers for that.
Hi mate, Bought a mower exactly like yours second hand,can you tell me please if it has a air cleaner filter?and not just a cover that goes over where a air cleaner looks like where it should be.
Hi there, Yes mine does have a filter. I removed the cover and checked. It's been a great mower. The key switch was a bit dodgy so I changed it to a push button bought at JayCar.
great video - thanks. Just one tip, dont use those crappy plastic washers. they dont last very long, use something brass like these: www.bunnings.com.au/fix-a-tap-13mm-1-2-soft-turn-tap-valve-6-pack_p5015448
For the electrics did you buy a plug in system or did you have to locate and cut wires? Thanks
Sorry I missed your message. I trade the car in 2019, but from memory, the tow bar (bought used) came with this orange control box that you could plug directly into. It was pretty straight forward.
Have you got the lid on properly. I have one and love it. You must have everything exactly right.
I've been driving a skip truck for nearly 4 years now and I'm over people overloading there bins..really pisses me off
do you tell them don't over fill the bin, don't take it tell them take most it off, I drive a skip bin truck and driving a Bobcat in the yard only small business over 10 years I drive a 8 tonne truck, I told the customers you need to take most of it and no asbestos if was a building site if was a asbestos they must wrap it up in black plastic
@@peterbrown1968 if I pull up to a bin and its overloaded with lots of little stuff that I cant just pull off myself ill keep driving and have the customer informed that they need to make the bin level..when the company i work for was doing well (about to go under any day now ) every single person that ordered a bin was told to have the bin level and given a list of things that we will not take and they would still overload it just to take it off again. People will try and get away with whatever they can these days
@@holdenfan4513 I have seen a video on UA-cam I think it was in the UK he picked up the garbage bin he reversed down the driveway and he tipped all the rubbish back out then he drives off, it was so funny you should find it you will have a laugh, my boss is selling the business
Thanks Suresh - this solved my issue with fixing an old shower tap that I didn't realise had a spindle extender on it.
Is it the 50 degrees one?
The installers asked me if I wanted to install the device to limit the heat to 50 degrees. I declined, mine is 60 degrees. They recommend 50 degrees if you have small kids.
Where did you get the remote from? I have a similar one and it's dying now. Need to replace it.
Woww... Super.. È in vendita???
Dude someone gave me one and its impossible to push. I'll check to clean around the wheels but is bearings a usual problem?
Mine stopped filling up the bag and the sandpaper keeps sliding off. I hate it.
Thanks for the video. It gave me the idea to help me fix a buggy that was not working.
Are you making a tropical tank?
Yes. I converted this to using an external sump, rather than a built in filter.
You don’t need tape as you have the red fiber washer.
It's a good tool mate, try using the bull point bit and also take bigger bites, it'll smash the concrete much quicker